Hyundai H-CMMD4043 Bedienungsanleitung PDF herunterladen (Seite 21)

Aspect ratio

 Press DISP / WIDE button on the monitor or WIDE on the Remote Control repeatedly to select the aspect

ratio: FULL => NORMAL => STANDBY => NORMAL => FULL.

Image setting

1. Press the PIC button on the RC on the monitor to enter the picture quality setting menu.

2. Press the /buttons on the RC or the  button on the panel to select the setting.

3. Press the / button on the RC or the  button on the panel to adjust the setting.

4. Press the PIC button on the RC to exit.

Parking cable function

If the PRK SW cable is connected to hand brake switch, the video view to the

TFT monitor will be switched between Normal display and Caution display.

Parking cable function is ceases if Parking is OFF. Please refer to PARKING.

When Parking is ON the monitor will show the special screen to prevent the

driver watching other content during driving. The passengers at the rear can watch

normally.

Monitor movement mechanism

When any path blocking or obstruction for the movement of the monitor occurs,

the following protection executes to prevent any damage to the loader or the

monitor. After the protection executed normal operating resumed after the

following action of the monitor performed by pressing the OPEN/CLOSE button

or repowering the unit. If it doesn’t help please reset the unit.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 102 103

Keine Kommentare

Hyundai H-CMMD4043 Bedienungsanleitung Seite 21